The Static Meter electrofiel meter is a small hand-held field strength meter with digital display for measuring electrostatic charges in Volt. It perfectly combines easy operation with accurate measuring technique.

The Static Meter measures charges according to the field influence principle C: The influenced charges, caused by electrically field, generate an alternating current proportional to the electrical field strength. The selective amplifier converts this value into the corresponding field strength or electrical potential – without withdrawing energy from the electric field over the averaged time

Field pattern of an uniformly charged film A and of a uniformly charged film above the earthed/grounded metal plate B: The electric field of the electrostatic charge is converted into a measuring alternating current through the cyclical covering of the sensor plates. The display shows a tension proportional to the intensity and polarity of the field to be measured.

Field strength meters are working according to this principle have a high measuring sensitivity and allow very accurate measuring

Two 26 mm long spaces are supplied together with the device. These ensure that the distance of measurement is always correct (= 2 cm).

The LG is an indispensable production aid for film processing, electronic manufacture, and precision mechanics. This device has also proven to be very reliable and efficient for the manufacture of measuring devices and control gears, for PCB assembly as well as for screen and pad printing and other printing procedures